A 3D printed wax seal stamp costs almost nothing to make and produces impressions as sharp as commercial brass seals — if you print it right. Here's how.
Some links on this page are Amazon affiliate links — we may earn a small commission if you buy, at no extra cost to you.
Custom wax seal stamps typically cost $30–80 from engravers, with 2–3 week lead times. A 3D printed wax seal stamp costs $0.50–2 in resin or filament, prints in under two hours, and you can iterate the design as many times as you want at no additional cost. Design one in Stamp3D's free 3D stamp maker — no software or account needed.
The quality difference between a 3D printed and commercially made wax seal comes down almost entirely to printer type. FDM produces decent results for bold monograms and simple designs; resin produces impressions that are genuinely difficult to distinguish from professionally engraved brass seals.
Free browser-based generator. Choose Circle shape, type your initials or upload a design — download a print-ready STL in seconds. No account needed.
Open Stamp3D — It's FreeMost commercially available wax seal kits use a 25mm (1 inch) seal diameter. This fits standard wax beads, wax sticks, and most wax seal spoons. It's also proportioned correctly for a wax dot on an A2 envelope.
| Diameter | Best for | Wax amount |
|---|---|---|
| 20mm | Small seals, mini envelopes, gift tags | 1 small wax bead |
| 25mm | Standard — works with all wax seal kits | 1–2 wax beads |
| 30mm | Detailed designs, wedding invitations | 2–3 wax beads |
| 40mm | Large statement seals, packaging | 3–4 wax beads |
If you're new to wax sealing, start with 25mm. It's the most forgiving size for beginners — enough surface area for a clear impression without requiring perfect wax amount control.
This is where printer type matters most. Hot wax fills in every surface imperfection of the stamp — layer lines included. FDM layer lines at 0.1mm are subtle but visible in the final wax impression. Resin (MSLA/SLA) produces a naturally smooth face that leaves no layer artifacts in the wax at all.
| Printer | Material | Result quality | Best for |
|---|---|---|---|
| Resin (MSLA) | Standard resin | Excellent — smooth, sharp | Weddings, gifts, fine monograms |
| FDM | PLA or TPU | Good — slight texture | Casual sealing, bold designs, prototyping |
For wax seals that need to look professional — wedding invitations, client gifts, correspondence — print in standard resin. For everyday journaling seals or to test a design before committing to resin, FDM in PLA works fine.
Use standard (rigid) resin for wax seal stamps, not flexible resin. Wax seals need a firm, non-flexing stamp face to transfer sharp detail into the wax. Flexible resin can deform under stamping pressure.
Yes — Stamp3D's wax seal generator is completely free, with no signup and no account. Choose Circle shape, type your initials or upload a logo, and download a print-ready STL in seconds. Everything runs in your browser; nothing is uploaded unless you choose to share it.
Yes. A 3D printed wax seal stamp works exactly like a traditional engraved brass seal. Resin (MSLA/SLA) gives the sharpest, smoothest impressions since it leaves no layer lines in the wax; FDM in PLA also works well for bold, simple designs. Print face-down for the smoothest stamp face, and keep Mirror text on.
Print in standard rigid resin at 0.05mm layer height for the crispest detail — this is what gives wedding wax seals that professional, engraved look. Use a 25mm or 30mm diameter, keep Mirror text on, and chill the finished stamp on ice for 60 seconds before each use so it releases cleanly from the wax.
A wax seal stamp presses into hot wax rather than ink, so it needs a rigid, non-flexing face — the opposite of a rubber/TPU ink stamp. Print wax seals in resin or rigid PLA, not flexible filament, and always keep Mirror text on so the design reads correctly once the wax cools.
The stamp is the free part. These are the consumables — wax is the only thing you'll buy repeatedly.
Choose Circle shape, enter your design, keep Mirror on — download your wax seal STL in seconds. Works for resin and FDM printers.
Open Stamp3D — It's Free